0

Your Cart is Empty

New

NatureWax C-6 Soy/Coconut Container Wax

Weight

NatureWax C-6 is a premium, plant-based Soy and Coconut wax blend ideal for container candles and tealights. Specially blended for superior glass adhesion, smooth finish and superior resistance to visible frosting and fat blooms. C-6 has exceptional scent throw and incorporates dyes for vibrant colours

C-6 is a creamy white wax supplied in slab form which is quite soft and is very easy to chunk up to fit into your melting device

 

  • Slab form
  • Melt point 80-85C
  • Pour Temperature 65-75C
  • Max Fragrance load 6%

Please note: Personal testing must be completed to achieve optimal results.

Product Instructions

NatureWaxTM C-3HANDLING AND MELTING INSTRUCTIONS – CONTAINER CANDLES

Melt temperature: 55-60 degrees Celsius.

Step One:Melting of Wax – The wax should be heated to a temperature of 160 to 200°F (71.1 to 93.3°C) to melt the wax. Do not heat the wax above 200°F (93.3°C). If wax is held at higher temperatures for long periods of time, it will discolor. Always use a thermometer when melting the wax and never leave your heated wax unattended. While the wax is melting, stir the wax regularly to reduce localized heating of the wax. This will help to reduce burning of the wax while heating.

Step Two:Adding of Ingredients (other than Scent and Dye) – Other additives or ingredients may be added at any time to help improve the performance of the wax.

Step Three:Adding Candle Scent and Dye – The fragrances and dyes should be added to the wax after the wax is completely liquid. Make sure to stir the wax completely to ensure that the fragrances and dyes are completely mixed in.

Step Four:Preparing the Wax for Pouring - After wax has been completely melted reduce the heat on the wax so that the wax cools to a temperature of 120 to 165°F (48.9 to 73.8°C). This will reduce cracking and discoloration of the wax after it has cooled. Pour Temperature should be matched to ambient room temperature recommendations in the table below for best results.

Step Five:Pouring Candles – Make sure that the container is at room or slightly warmer before pouring the wax into the container. The wax should be poured in the container while the wax is 120 to 180°F (48.9 to 82.2°C) to reduce cracking and speed up the cure time of the wax. If the wax is to be left in melter overnight, the wax should be stored at a temperature of 130 to 145°F (54.4 to 62.8°C).

Ambient Room Temperature Wax Pour Temperature
15.6 to 21.1°C 76.7 to 82.2°C
21.1 to 26.7°C 71.1 to 76.7°C
26.7 to 32.2°C 62.8 to 68.3°C

Step Six:Curing of Candles – The candle should be allowed to cool and cure for at least 12 hours before the candle is burned. This will allow the crystals of the wax completely form giving a nice finish to the candle.

Notes:

• Maximum Recommended Fragrance – 6%

• A 7 to 10% fragrance loads may be added with the addition of additives to help control the fragrance.

• Candles over 3.5 inches in diameter may need to be double wicked to ensure full melt pool.

• Works well with liquid or powdered dyes.

NatureWax® is the market leading provider of higher-performance,natural vegetable-based waxblends used by premium candle makers across North America. NatureWax® offers the broadest and most comprehensive selection of innovative, premium natural waxes available to candle makers.
NatureWax® products are known for:

  • Burns up to 50 percent longer compared to mineral waxes under similar conditions.
  • Supporting increased fragrance loading in candle with no syneresis as compared to paraffin based systems
  • Exhibiting better glass adhesion than other natural wax formulations resulting in less waste material and fewer customer returns.
  • Made from renewable vegetable sources that can be replenished at a faster rate than many alternative fluids providing long-term, reliable supply
  • NO ANIMAL TESTING:
  • "Cargill can confirm that it hasnot conducted or commissioned any animal testingon this product after March 11, 2009. Cargill has no plans to undertake or commission any animal testing of this product (unless we are required to undertake such testing under mandatory applicable legislation or as a result of a request of a local authority)."

Safety Data Sheets (MSDS)

Customer Reviews

Based on 5 reviews Write a review

{[{GetTitle()}]}


{[{item.Title}]}
{[{item.Price}]}

Subscribe